China Oil Immersed Magnetic Controlled Reactors (MCR) - Top Suppliers & Factory for Reactive Power Compensation
Magnetic controlled reactors
Magnetic controlled reactors （MCR） is a kind of shunt reactor with adjustable capacity, which is mainly used for reactive power compensation of power system.
MCR has magnetic valve to control the permeability of reactor core, which saturates the whole iron core and improves the performance greatly by changing the structure of the magnetic furnace on the basis of the traditional magnetic saturation and reactor. so as to smooth the effective inductance of electrodeless regulator. Schematic diagram is as follows:
An MCR is primarily used for dynamic reactive power compensation in power systems, helping to stabilize grid voltage, improve power factor, and reduce transmission losses.
It achieves adjustable capacity by utilizing a magnetic valve structure to control the magnetic permeability of the core, allowing for smooth, step-less regulation of the reactor's effective inductance.
MCR offers high reliability, low harmonic generation, fast response speed, and maintenance-free operation compared to conventional fixed or mechanically switched reactors.
They are commonly installed in wind farms, solar power plants, substations, electrified railways, and heavy industrial grids where rapid reactive power compensation is required.
Yes, MCRs are designed to integrate seamlessly with automatic excitation control systems, allowing for real-time monitoring and automatic regulation of reactive power based on grid conditions.
HEADING-TYPE-1
High voltage parallel capacitors are suitable for parallel connection in AC power systems with power frequency (50Hz or 60Hz) of 1kV and above. They are used to compensate for inductive reactive power, improve power factor, improve voltage quality, reduce line losses, and fully utilize the efficiency of power generation and supply equipment.
description2
HEADING-TYPE-1
High voltage parallel capacitors are suitable for parallel connection in AC power systems with power frequency (50Hz or 60Hz) of 1kV and above. They are used to compensate for inductive reactive power, improve power factor, improve voltage quality, reduce line losses, and fully utilize the efficiency of power generation and supply equipment.
description2